Product presentation
A full walkthrough of the Cyclone2X and how it increases the air volume your blower moves.
Tests & installation
See the Cyclone2X in action
The official installation guide, followed by four videos: a product presentation, a field test, lab trials and a full installation walkthrough.
Official guide
Installation in 3 simple steps
Follow the diagram and these three steps for a snug, secure fit.
1
Insert
Slide it on
Make sure the nozzle is clean and dry. Slide the Cyclone2X onto the end of your blower's nozzle, as shown in step 1, and line it up with the edge of the nozzle.
2
Position
Seat it on the shoulder
Push it on until the shoulder, the wider part of the Cyclone2X, sits snug over the nozzle, as shown in step 2. Check that it's centered.
3
Tighten
Tighten both straps
Tighten the two straps until the Cyclone2X can't slip off. Firm, not over-tightened. If the straps don't hold on your blower, a zip tie or metal hose clamp works too. Turn on your blower to test it.
Video demonstrations
Demonstration & testing videos
Field test
The Cyclone2X at work on real lawns, driveways and heavy leaf cover.
Lab trials
Measured air volume with and without the Cyclone2X, showing the Venturi effect at work.
Installation guide
Step-by-step instructions for a secure fit on round nozzles from 2 to 4 inches.
Fits round nozzles 2"–4"
Move more air with the blower you own.
30-day satisfaction guarantee and 90-day limited warranty.